60U VACBUILT
Key Features:
- (1) 60-gal (227.13-L) horizontal waste oil tank
- (1) Removable mounting plate for hose reel and controls
- (1) 25-ft reel
- No compressor
Description
The 60U VacBuilt simplifies onsite oil changes. It provides flexibility when you don’t require a new bulk oil tank when performing fluid changes. A hose reel and controls are conveniently packaged with Sage Oil Vac’s no-pump vacuum technology to vacuum hot motor oil from equipment at up to 8 gallons per minute.
The 60U VacBuilt includes a 3/4-inch by 25-foot (1.905-cm x 7.6-m) hose on spring retractable reel, a pressure gauge, a ball valve with a pressure relief setting and a ball valve with a vacuum setting.
Specifications
POWER
- Additional air source required
- Vacuum generator for vacuum assist
- Push-on fitting at air inlet
HOSES AND REELS
- (1) 3/4-in by 25-ft (1.905-cm x 7.6-m) hose
- Spring retractable reel
SAGE OIL VAC ATTRIBUTES
- Patented vacuum process to remove used oil
- Enclosed system to protect the operator and the environment
- No-pump system to reduce maintenance
- Shop or truck mounted set up
CONTROLS AND MOUNTING
- Removable mounting plate for mounting a hose reel and controls to the top of the tank or remotely
- Control panel includes a pressure gauge, a ball valve with a pressure relief setting and a ball valve with a vacuum setting
DIMENSIONS AND WEIGHTS
- Length: 48-15/16 in (124.2 cm)
- Width of tank: 20 in (50.8 cm)
- Height with hose reel mounted: 54-3/16 in (137.7 cm)
- Height without hose reel and removable control panel mounted: 22-7/8 in (58.1 cm)
- Shipping weight: 222 pounds (101 kg)
- Full tank weight: 666 pounds (303 kg)